Solutions
Related Articles
Specialist Flooring Solutions
DUROFLOW
Self-leveling cement floor
DUROFLOW Self-leveling industrial floor cement-based system. Powdered mix that contains special cements, additives, and fractionated compatible admixtures. Used to create a self-leveling mixture with a high degree of fluidity, which can be pumped. This tool is used during installation of industrial flooring or reconstruction. Ease of application and quick curing makes it possible to laying flooring in a short period of time. After
curing and sealing DUROFLOW creates resistant and durable surface
suitable for industrial premises, warehouses, garages, stores, etc.
SPECIAL FEATURES
• Self-levelling ability
• Quick and ease to use
• full load up to 7 days
• Guaranteed quality - inside and outside
SUBBASE PREPARATION
The mixture was applied to the concrete base, free from dust, dirt, oils and fats. The concrete foundation must have a minimum tensile strength of 1.64 MPa (tensile test). Cracks, cavities and other defects should be repaired. Active dilatation joints should be after the completion of update, ie re-cut and fill in the appropriate material for jointing. The dry, purified base primer applied by roller. Dilution with water and the number of layers depends on the absorptive capacity of the base. Well-prepared surface - smooth, with no dull dry places.
SPECIFICATIONS
* Thickness: 5-25 mm
* Bulk density of wet material: 2100 kg / m
* Consumption: 1,6 kg/mm/m2
* Compressive strength: 55 N/mm2 after 28 days
* Tensile strength: 13.3 N/mm2 after 28 days
* Water requirement: 5,5 kg litr/25
* The spreading (CEN): 14 sm/15 min.
* Zakladyvaemost: 20°C: 20 minutes
* Start of setting: 2 hours 20 minutes
* End of setting time: 3 hours 40 minutes
Profibeton Ukraine is an exclusive supplier DUROFLOW in Ukraine.
DUROchape can be applied on finished concrete surfaces and it is a cement and resin emulsion binding slurry material, which can be used for creating a 1 cm thick, self-colored, heavy duty use, monolithic floor surface coating.
DUROchape is an outstanding solution in – because of its high abrasion resistance – industrial halls, warehouses, anywhere, Durochape is used where the floor has to face heavy duty, intensive traffic.
DUROchape can be applied to fresh, but already dry concrete, or to old concrete; can be used at new constructions or at renovations.
DUROchape has outstanding resistance parameters against blood, souse (Salt-mordant), greases, fats. Resistant to every type of blended acid or lye, which are frequently used by the food industry for cleaning purposes.
DUROchape can be utilized for creating rounded plinths for partition walls, but it can fully cover mason structured and protective shoulders as well.
DUROchape is extremely easy to keep clean with power washing system, neutral or lye-based detergents
or with low pressure foam-spray. Detergents and mordant products must be avoided.
